Dyostop Waterproofing Sealer

Product Description

DYOSTOP is a Solvent borne odorless, matt paint based on thermeoplastic resin, designed for interior mineral

FEATURES: substrates. It blocks the dampness and humidity coming from the surface. SPREADING RATE: (for one coat): 4-6 m2/L Size: 2.5L.

Enlastic Waterproofing Sealer

Product Description

TCP ENLASTIC can be safely used as insulation material on all horizontal and vertical surfaces in closed damp environments such as wall, roof, terrace, basements, underground storehouses, bathroom and foundations to insulate water leakage. Enlastic has high flexibility and elasticity

USAGE AREAS: • Interior and exterior locations • Foundation and basement of structures • Wall and floors • Protection and isolation of structures and structural elements in contact with leachate and groundwater • Balcony and terrace insulation. COLOR: black, COVERAGE: 1m²/kg, SIZE: 17kg / 4.5kg.

Enkotek Waterproofing Sealer

Product Description

TCP ENKOTEK can be safely used as insulation material on all horizontal and vertical surfaces in closed damp environments such as wall, roof, terrace, basements, underground storehouses, bathroom and foundations to insulate water leakage.

USAGE AREAS: • Interior and exterior locations • Foundation and basement of structures • Wall and floors • Protection and isolation of structures and structural elements in contact with leachate and groundwater • Balcony and terrace insulation. COLOR: black, COVERAGE: 1m²/kg, SIZE: 17kg / 4.5kg.

Enprimer for Waterproofing Sealer

Product Description

TCP ENPRIMER is a primer to use in all kind of membrane applications. The application surface should be without dust, rust, dirt, grease, oil and the loose parts, if so, they should be cleaned/removed. The surface should be dry at the time of the application. The application of Enprimer should not be done during inclement weather conditions or when ambient temperature is below +5°C. Enprimer shall be applied as cold. It is applied by brush or roller. Enprimer dries within 4-5 hours depending on the weather conditions. Enkotek, Enlastic or Enmembrane shall be applied after the complete drying of the primer. COLOR: black, COVERAGE After adding ¼ of water and by the usage of 400g/m² one bucket of Enprimer covers ~50 m².

Enfleks Waterproofing Sealer with Fiber

Product Description

ENFLEKS is an acrylic copolymer based, fiber reinforced liquid plastic coating and isolation material.
Areas of Use. Enfleks Fiber is successfully applicable on interior and exterior walls of the buildings, columns, foundations and roofs, an in all other plaster, brick, tile, ytong constructions, vertical and horizontal surfaces, eaves, rain pipes, filters, and chimney bases where water and moisture penetration is not desired.

SPECIFICATIONS •Enfleks with Fiber is entirely water-proof. • Easily applicable due to its semi-liquid structure. Therefore, even hardest surfaces can be covered with this substance. • It is elastic. • Excellent sticking process on all kinds of construction material. • Maintains its elastic characteristics against hot and could changes. • Resistant to weak chemicals and ultra-violet rays. • Enables respiration of the surfaces. • Decorative. Produced in white color.• In open places, it can be tested after 48 hours COLOR: White and Grey, COVERAGE: 1-2m²/L, SIZE: 15L.

Enfleks Waterproofing Sealer without Fiber

Product Description

Acrylic copolymer based, reinforced liquid plastic coating and isolation material.
Areas of Use. Enfleks is successfully applicable on interior and exterior walls of the buildings, columns, foundations and roofs, an in all other plaster, brick, tile, ytong constructions, vertical and horizontal surfaces, eaves, rain pipes, filters, and chimney bases where water and moisture penetration is not desired.

SPECIFICATIONS • Enfleks is entirely water-proof. • Easily applicable due to its semi-liquid structure. Therefore, even hardest surfaces can be covered with this substance. • It is elastic. • Excellent sticking process on all kinds of construction material. • Maintains its elastic characteristics against hot and could changes. • Resistant to weak chemicals and ultra-violet rays. • Enables respiration of the surfaces. • Decorative. Produced in white color. • In open places, it can be tested after 48 hours COLOR: White and Grey, COVERAGE: 1-2m²/L, SIZE: 15L.